15
MK-1503SS
SETUP
1. Choose the correct Polishing Disc for the material to be polished (start with a
50, 120 or 220 coarse grit Pad).
NOTE:
(D)
Verify the Cooling Flow Control
Valve is closed.
(A)
Align the Velcro Polish-
ing Disc to the Backer Pad.
Press disc evenly and firmly
onto the Backer Pad.
(A)
If necessary, clamp the material
to be polished to a work surface.
(B)
Verify the Polishing Disc is
centered on the Backer Pad
and the Cooling Ports are
not covered.
(E)
Connect Cooling Supply Line to
a water supply.
Pad Installation for Polishing
Material Setup
