Two steps of compass calibration:
The aircraft front and rear lights flash yellow alternatively. Hold the aircraft horizontally and
rotate it 360 degrees along the central axis for about 3 circles. The aircraft front and rear light
will change from flashing yellow alternatively to flashing green alternatively when horizontal
calibration is completed.
Bugs 12EIS User Manual
!
!
Attention:
● To fly at GPS mode, please choose an open and wide space for the flight, and make
sure that the satellite amount is over 7.
● In GPS Mode, if the drone cannot hover to a fixed point or the effect is bad, please
re-calibrate the Geomagnetism, it can improve the flight performance.
● Please do not calibrate the compass in strong magnetic area, such as magnetic field,
parking place or construction areas with underground reinforcement.
● Please do not carry magnetic materials with you (such as keys, cell phones, etc) when
calibrating compass.
● Please keep away from big metal when calibrating compass.
Step 1: Horizontal calibration
Hold the aircraft with camera facing up, and rotate it 360 degrees along the central axis for
about 3 circles until the front and rear lights of the aircraft change from flashing to solid on,
the compass calibration is successful.
Step 2: Vertical calibration
-22-
