Wall Controller Functions:
ON
OFF
ZONE 1
ZONE 2
ZONE 3
ZONE 4
FAN
CANCEL
MODE
ENTER
DOWN
UP
PROGRAM
MJB
C o n t r o l s
1
2
3
4
5
6
7
8
9
10
(1)
Turns unit On or Off
(2)
Adjusts fan speed. Also used as Cancel button
in Programming Mode.
(3)
Adjusts mode, e.g. Heating, Cooling, Fan only
etc. Also used as Enter button in Programming
Mode.
(4)
Places unit in Program Mode.
(5)
Use to decrease temperature. Also used to
decrease settings or menus in Program Mode
(6)
Use to increase temperature. Also used to
increase settings or menus in Program Mode.
(7)
Press to activate Zone 1
(8)
Press to active Zone 2
(9)
Press to activate Zone 3
(10)
Press to activate Zone 4
Please note that the Air Conditioning System must be turned on
to set any of the following options:
Setting the Time:
1) Press the
PROGRAM
button to place the wall controller in program mode.
2) Press the
UP / DOWN
buttons until the wall controller says
SET CLOCK
.
3) Press the
ENTER
button to enter clock set mode.
4) Press the
UP / DOWN
buttons the set the desired hour then press
ENTER
.
5) Press the
UP / DOWN
buttons to set the desired minutes then press
ENTER
.
6) Press the
UP / DOWN
buttons to set the seconds to zero then press
ENTER
.
7) The time has now been set. Press the
PROGRAM
button to save the new
settings or press the
UP/DOWN
buttons to continue.
ACCS-1_UM v1
Copyright © 2005 MJB Controls Pty Ltd All Rights Reserved
Proudly Designed and Manufactured in Australia Page 3 of 6
