Setting 7-Day programmable time clock:
1) Press the
ON
button.
2) Press the
PROGRAM
button to place the wall controller in program mode.
3) Press the
UP / DOWN
buttons until the wall controller says
SET TIMER
.
4) Press the
ENTER
button to enter timer mode.
5)
T1CLR
will now be showing on the display, this means
TIMER1
is clear (no
settings, if there was a previous setting then this will be displayed).
6) Press the
DOWN
button until
DAY1
shows on the display. From here you can
choose from following days sequence’s MONDAY to FRIDAY, MONDAY to
SUNDAY, or individual days by pressing the
UP / DOWN
buttons. Once you
have set your required days press the
ENTER
button to save.
7)
T1 ON
time will now need to be set.
8) Press the
UP / DOWN
buttons to set the desired hour then press
ENTER
9) Press the
UP / DOWN
buttons to set the desired minutes then press
ENTER
10)
T1 OFF
time will now need to be set.
11) Press the
UP / DOWN
buttons to set the desired hour then press
ENTER
12) Press the
UP / DOWN
buttons to set the desired minutes then press
ENTER
13) Should you wish to clear/cancel the timer function press the
UP / DOWN
buttons until
T1 CLR
is displayed. This means you have cleared/cancelled the
timer.
The time clock has a total of 4 timers, this allows for 4 different ON – OFF times over
a 7-day period.
For example. If you wish to turn your Air Conditioner on at 8am and off at 10pm
Monday to Friday, this can be achieved using the first timer T1
Should you wish to turn the Air Conditioner on at 9am and off at 11pm on Saturday only as
well as the previous time periods this is achieved using the second timer T2 in conjunction with the
first timer T1
Additional timers are set in the same manner as above. If you need more information please contact the
place of purchase.
ACCS-1_UM v1
Copyright © 2005 MJB Controls Pty Ltd All Rights Reserved
Proudly Designed and Manufactured in Australia Page 5 of 6
