2 7
Features
●
Power supply: AC100V-240V
●
Frequency: 50-60Hz
●
Power consumption: 162W
●
Light source: 9pcs 18W high brightness 6 in 1 leds
●
Lamp life: 6-10 ten thousand hrs
●
LED angle: 30(±5) degree
●
Color: 16.7 million kinds of color change
●
Control channels: 6/10 CH
●
Battery power & wireless DMX
●
Wireless DMX-512 protocol
●
Built in 2.4G receiver/ transmitter for wireless DMX operations
●
Control mode: DMX512, master/slave, auto, sound active (can order wireless
DMX512 also)
●
Automatic model(by function button) : color change, color strobe, color dimmer,
color gradual change/color jump change
●
Operation menu: 4 digit digital LED display
●
Packing size: 265*165*275mm
●
N.W: 3.8kg
●
G.W: 4.5kg
Safety Precautions
●
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
●
Do not spill water or other liquids into or on to your unit.
●
Be sure that the local power outlet match that of the required voltage for your
unit.
●
Do not attempt to operate this unit if the power cord has been frayed or broken.
Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and fire in case of an
internal short.
●
Disconnect from main power before making any type of connection.
●
Do not remove the cover under any conditions. There are no user serviceable
parts inside.
●
Never operate this unit when it
‟
s cover is removed.
●
Never plug this unit in to a dimmer pack.
●
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall.
●
Do not attempt to operate this unit, if it becomes damaged.
●
This unit is intended for indoor use only; use of this product outdoors voids all
warranties.
Tip for the battery and charge:
●
The battery can last for 3-4 hours when all LEDs on after full charge , and can
last for more than 8-10 hours on auto running mode. Up to12 Hours with one color
diode on. Results will vary based on brightness of LEDs
●
It is suggested to charge the battery for at least 4 hours, which will extend the
life span of the battery.
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and
charge is set on the rear panel. It is showed as the following picture,
and the function is described as below.
1.Batter charge On/Off 2.DMX LED 3.LCD display
4. Menu switch 5.Power LED 6.Power LED
7. ID code selector 8.Wireless LED 9.Battery LED
10. DMX-Out socket 11. DMX-In socket
12. Power out 13. Power in
