6 3
CH6
0
No function
No function
1-255
Purple dimmer
White dimmer
CH7
0
No function
1-255
Amber dimmer
CH8
0
No function
1-255
Purple dimmer
CH9
0-9
No function
10-29
Mixing color
30-49
Color running
50-69
Color fade
70-89
Color mutation
90-109
Color red
110-129
Color
green
130-149
Color
blue
150-169
Color
amber
170-189
Color
purple
190-209
No function
210-229
Sound-control-1
230-249
Sound-control-2
250-255
Sound-control-3
CH10
0
1-255
There are two buttons on the rear panel of the lighting. One is for power, and the
other is for signal.
●
When use the fixture with DMX, not wireless, please switch the signal button
for “off”
●
When use the wireless DMX, please switch the button for “on”
●
When charge the light, please switch both of the button for “of”. At the same
time, if the switch for power is “on”, the light will be at work during the process of
charge, but will consume some power from the charge; if the switch for power is
“off”, the light will be blackout and not be at work.
●
During long periods of non-use, disconnect the unit
‟
s main power.
●
Always mount this unit in safe and stable matter.
●
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to
the point they exit from unit.
●
Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
●
Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
●
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in
performance
●
Fuse standard is 2A/250V
●
Grounded using yellow/green line
●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your
area matches the required voltage for your light is workable in
100-220V/50~60Hz. Because line voltage may vary from venue to venue, you
should be sure your unit voltage matches the wall outlet voltage before
attempting to operate you fixture.
Operating Instructions
Operating Modes: You can use the light in 5 ways:
●
Sound activation – The unit will activated by the sound signal.
●
Static display – The unit will display the color in static way.
●
Auto Mode -The unit will automatically chase through the different patterns.
●
DMX control mode -This function will allow you to control the lighting with a
standard DMX 512 controller.
●
Battery powered – This function will allow you to control the lighting
independently without any DMX cable
DMX Mode:
Operating through a DMX controller give the user the freedom to
create their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as pattern changing lights.
