Combination key
Combination by 2 or more key. Such as “UP+DOWN” Press UP and DOWN
at the same time.
Combination key of “UP+DOWN” is different from “UP” or “DOWN”, it have
its own function.
Long press
Press the button for long time then leave.
2.2. Menu description
A. Main menu
LED show
English
word/function
Key operation
Description
A
dvanced D
MX
UP/DOWN key to choose the
address code (1~512)
ENTER key to save
check “channel
data”
Advance DMX
controller state
d
MX
normal DMX
controller state
SLAv
e
equal“d001”
Above is the slave mode, attention:
1
、
Make sure there is only a signal (controller or master light)
2
、
The light will be turn off if the signal is cut down. (turn off the
controller or master light)
Cool white
(0~255)ENTER to choose
the led group
UP/DOWN to choose the
bright of the led group
Change color
4
St
robe
UP/DOWN key to choose the
speed (1~50)
ENTER to save.
Strobe
Sou
n
d
Sound model
Above is the master state, the light will send the data automatically.
(the slave light should set “d001” or “SLAv”)
B. Current adjustment
1. Main menu
Under any main menu item, press and hold the MENU, after about 3 seconds
to enter the "keyboard current adjustment" mode, Then can adjust the
current . Proceed as follows:
1
、
First see the "r030". "R" stands for red, so only red will be lit at this time,
and the other colors will turn off automatically. "030" represents the
current current value, use the UP button or DOWN button to adjust from 0
to 255.
Note that the slow increase, suitable for this: If the current is
too large, will lead to lamp beads burned!
2
、
After adjusting the red, press the "MENU" key to switch to "G030" began
to adjust the green, the same time it will only light green while the other
colors will automatically shut down ... ... The adjustment of other colors
and the like.
3
、
Press "ENTER" key to save and automatically return to "A001" menu
2. DMX Current regulation
Through the console (or host) for multiple lights current regulation. The
console for example, the following steps:
5
