1.
Product Introduction
1.1.
Current regulation
The current need to be adjusted by software before Ex-work. (Please
check the menu description of “current adjust”.)
1.2.
Screen protection
Without operate key in 30 seconds , it enter black screen (can be set)
Press any keys then it can quit screen protection status
1.3.
Reminder from Signal
In the Slave State, the screen will flicker if no receive the signal from
controller or master light. Attention: When the screen flicker (it means the
cable connect is wrong), it won’t be the screen protection mode even it is
time to enter screen protection mode. If it already the screen mode, it will
automatically log out. The reason that no screen protection in flicker is to
help to user judge if there has cable connection problem or not.
1.4.
Delay of controller
When push up or pull down the pushrod of the controller, the light will not
turn bright or dark at once, but change smoothly. (1 second) This function
can be turn on or turn off.
Special situation: pull down to “0”, the light will turn off right away without
delay.
1.5. Multi-light working in the same time
When using controller to control several lights, and using strobe, the
controller just send the channel data. The strobe would be showed by
itself. And should be attention for the follow situation:
2
LED show
English
Word/function
key operation
Description
L
ED waiting
t
ime
UP/DOWN choose the
waiting time
0 = no screen protect
Screen protect time
H
igh
P
ower
UP/DOWN choose high
power or not
On = 100%
off = 33.3%
Power choose
d
MX-controller
d
elay
UP/DOWN choose use
the controller delay or not
controller delay
Sy
nchronization
UP/DOWN choose
usemulti-light
synchronization or not
Multi-light
synchronization
LoAd
Long press ENTER until it
shows “LdEd”(loaded)
reset
rEt
ur
n
Press ENTER to save the
data and back to main
menu.
Back to function
menu
2.3. Contor Channel
3CH model(A001)
Channel
Data
Function
CH1
0~255
Dimmer
CH2
0~5
No function
6~255
Strobe: 6 is slowest, 255 is fastest
CH3
0~25
Turn on “delay by controller”
26~200
Turn off “delay by controller”
251~255
Sound mode: the changing of the light depends on
the MIC of each light
1CH model(d001)
Channel
Data
Function
CH1
0~255
Dimmer
7
