6 3
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and
charge is set on the rear panel. It is showed as the following picture,
and the function is described as below.
1. Alpha-numeric display 2. Touch switches 3. DMX-Out socket
4. DMX-In socket 5. Power out 6. Microphone 7. Power in
1. Antenna 2. Power switch for wireless receiver 3. Power switch for
battery power 4. Wireless indicator 5. ID code selector
6.Battery indicator
●
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to
the point they exit from unit.
●
Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
●
Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
●
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance
●
Fuse standard is 2A/250V
●
Grounded using yellow/green line
●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your
area matches the required voltage for your light is workable in
100-240V/50~60Hz. Because line voltage may vary from venue to venue, you
should be sure your unit voltage matches the wall outlet voltage before
attempting to operate you fixture.
Operating Instructions
Operating Modes:
You can use the light in 5 ways:
●
Sound activation – The unit will activated by the sound signal.
●
Static display – The unit will display the color in static way.
●
Auto Mode -The unit will automatically chase through the different patterns.
●
DMX control mode -This function will allow you to control the lighting with a
standard DMX 512 controller.
●
Battery powered – This function will allow you to control the lighting
independently without any DMX cable
DMX Mode:
Operating through a DMX controller give the user the freedom to
create their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as pattern changing lights.
1. This function will allow you to control each individual fixtures traits with a
standard DMX 512 controller.
2. The light use 5/9 DMX channels to operate. Please see “DMX channel and
Functions” for the DMX traits.
