background image

8                                                                                            1 

 
 

  Before open the LED par light and if you want to do the repair work, please 

make sure the power source is at the separation condition. 
 

  Unceasingly carries on the product improvement about our company the 

policy, in this instruction booklet carries the data will have the possibility to be 
able to change in the future, when no longer separate notice change matters 
concerned. Our company retains when the product improvement changes the 
related specification the authority. This instruction booklet publisher cannot be 
responsible regarding this instruction booklet in information accuracy, also 
cannot the related consequence which causes regarding these information be 
responsible 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First 
Charge before use. Plug in Power cord. Turn off Power Switch and Turn off 
other switch to charge.   

 

Introduction 

 

Unpacking: 

Thank you for purchasing this product, all products has been thoroughly tested and 

has been shipped in perfect operating condition. Carefully check the shipping carton for damage 
that may have occurred during shipping. If the carton appears to be damaged, carefully inspect 
your fixture for any damage and be sure all accessories necessary to operate the unit has 
arrived intact. In the case damage has been found or parts are missing, please contact the 
manufacturer or your dealer for further instructions. Do not return this unit to your dealer without 
first contacting.   

Introduction: 

The Light is a DMX intelligent and battery powered LED par light. This par light is 

light weight and compact which makes it a great piece for mobile DJ

s and clubs.   

Warning! 

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain 

or moisture.   

Caution! 

There are no user serviceable parts inside this unit. Do not attempt any repairs 

yourself; doing so will void your manufactures warranty. In the unlikely event your unit may 
require service please contact the manufacturer or your dealer.   

PLEASE recycle the shipping carton whenever possible. 

 

General Instructions 

 

To optimize the performance of this product, please read these operating instructions carefully 
to familiarize you with the basic operations of this unit. These instructions contain important 
safety information regarding the use and maintenance of this unit. Please keep this manual with 
the unit, for future reference.   

Notice :please pay attention to ventilation, to prevent the 
battery overheat cause burning When charging. 

 
 
 

 

Summary of Contents for MJ-3118B






Reviews: