2 7
Features
●
Power supply: AC100V-240V
●
Frequency: 50-60Hz
●
Power consumption: 180W
●
Light source: 12pcs 15W high brightness RGBWA 5in1 LED
●
Lamp life: 6-10 ten thousand hrs
●
LED angle: 30(±5) degree
●
Color: 16.7 million kinds of color change
●
Control channels: 5/9 CH
●
Battery power & wireless DMX
●
Wireless DMX-512 protocol
●
Built in 2.4G receiver/ transmitter for wireless DMX operations
●
Control mode: DMX512, master/slave, auto, sound active, IR remote (can
order wireless DMX512 also)
●
Automatic model(by function button) : color change, color strobe, color dimmer,
color gradual change/color jump change
●
Operation menu: 4 digit digital LED display
●
Packing size: 285*180*300mm
●
N.W: 4.5kg
●
G.W: 5kg
Safety Precautions
●
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
●
Do not spill water or other liquids into or on to your unit.
●
Be sure that the local power outlet match that of the required voltage for your
unit.
●
Do not attempt to operate this unit if the power cord has been frayed or broken.
Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and fire in case of an
internal short.
●
Disconnect from main power before making any type of connection.
●
Do not remove the cover under any conditions. There are no user serviceable
parts inside.
●
Never operate this unit when it
‟
s cover is removed.
●
Never plug this unit in to a dimmer pack.
●
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall.
●
Do not attempt to operate this unit, if it becomes damaged.
●
This unit is intended for indoor use only; use of this product outdoors voids all
warranties.
●
During long periods of non-use, disconnect the unit
‟
s main power.
●
Always mount this unit in safe and stable matter.
There are three buttons on the rear panel of the lighting. One is for power, one is
wireless signal and the other is for charger.
●
When use the fixture with DMX, not wireless, please switch the signal button
for “off”
●
When use the wireless DMX, please switch the button for “on”
●
When you do not charge the light, please switch charge button for “off”.
●
When charge the light, please switch charge button for “on”.
●
if the switch for power is “off”, the light will be blackout and not be at work.
●
At the same time, if the switch for power is “on”, the light will be at work during
the process of charge, but will consume some power from the charge;
Tip for the battery and charge:
●
The battery can last for 4-5 hours when all LEDs on after full charge , and can
last for more than 10-12 hours on auto running mode. Up to 10 Hours with one
color diode on. Results will vary based on brightness of LEDs
●
It is suggested to charge the battery for at least 4 hours, which will extend the
life span of the battery.
Charge Warning:
1.For carton box:
Please do NOT put in carton box while charging.
2.For Flight case:
Please do NOT close the case while charging.
3.For charge time:
Please do NOT charge over 10 hours.
