6
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a
DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control
signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins
2 and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Function Set:
1.
Button Operation
UP
Esc Ecs
DOWN
Use button switch can set the address code and function code easily.
Check or modify lighting function settings, Press the any
button. LCD display panel will display main menus.
Function operation menu all have corresponding submenu . Each menu all represent the specific functions of
lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, Press
UP
,
DOWN
key.
Press
OK
key to save your changes or to enter submenu, Press
UP
or
DOWN
can change value(Plus
or reduce number).
O
K
