background image

 

 

4. Specifica tions : 

Voltage: AC100-240V  50-60Hz 

 

Led source: 4pcs high brightness 25W white LEDs 

Power: 130W       Beam angle: 5-40° 

Strobe: 1-25Hz/Second with various stroboscopic effects 

Dimmer: 16 bit dimming system, smoothly without strobe 

Pan: 540°+ fine   Tilt: 250°+ fine 

Color: RYB, colorful and symmetrical, with running water effect 

Channel: 11/15 DMX channels 

Control: DMX512/Master-slave/Auto/Sound activated   

Function: 1. Strong beam light effect, beam angle is optional, beam light with macro 

effect. 

          2. Each bulb is controllable, with racing light effect. 

          3. Intelligent fan control system, temperature auto detect system. 

N.W: 7KG    G.W: 8KG 

Packing Size: 31*27*40 cm (1pc/CTN) 

N.W: 16KG   G.W: 17 KG 

Packing Size: 57*33*43 cm (2pcs/CTN) 

 

5. Installation instruction: 

Cautions: 

For added protection mount the fixtures in areas outside walking paths, 

seating areas, or in areas were the fixture might be reached by 

unauthorized personnel. 

Before mounting the fixture to any surface, make sure that the installation area can 

hold a minimum point load of 10 times the device

s weight. 

Fixture installation must always be secured with a secondary safety attachment, such 

as an appropriate safety cable. 

Never stand directly below the device when mounting, removing, or servicing the 

fixture. 

From a ceiling, or ser on a flat level surface (see illustration below0. Be sure the fixture 

is kept at least 0.5 m away from any flammable materials. 

Always use and install the supplied safety cable as a safety measure to prevent 

accidental damage caused by the clamp fails.

      

 

 

.4.

 

7. Photometric Data 

 

Photometric Beam Angle Data 

5 ° Beam Angle  LUX

White

 

 

  

115800Lux@2m      32400Lux@4m    16000Lux@6      9200Lux@8m    6200Lux@10m 

 

                              

 

Photometric Beam Angle Data 

5 ° Beam Angle  LUX

RG BW

 

R:  11050 Lux@1m   4070 Lux@3m    15060 Lux@5m    830 Lux@7m 

G:  2670 Lux@1m    9060 Lux@3m    3370 Lux@5m      1680 Lux@7m 

B:  4480 Lux@1m     16060 Lux@3m   5360 Lux@5m      2660 Lux@7m 

W:    11570 Lux@1m   53070 Lux@3m   19500 Lux@5m   10170 Lux@7m 

 

 

 

.7. 

 

Summary of Contents for MJ-1034A







Reviews: