5
2
5. STBY (opening stop mode)
：
NO/ YES
6. PAN (X)
：
NO/ YES
7. TILT (Y)
：
NO/ YES
8. LED (digital display on/off setting)
：
ON/OFF
9. DISP (digital display direction setting)
10. TEST (function test)
11. HOUR (fixture use’s time)
12. RSET (reset)
Note
：
Start the machine, it will rolling display
：
******LED-RGB******
White balance adjusting
：
1. Press MENU enter the menu selection mode.
2. Press ENTER remain 5 seconds, then into white balance adjusting menu
（
BALA
）
。
Display will showing twinkling state.
3. Then press ENTER one time, going to the white balance adjustment directly.
RED(0-255)GREE(0-255)BLUK(0-255)
12. DMX function
11Channel
1. channel 1 control X motor
（
PAN
）
CH1
：
0 stop
，
1-255 adjusting X motor rotation
；
2. channel 2 control X bit
（
PAN
）
CH2
：
0 stop
，
1-255 adjusting X motor bit
；
3. channel 3 control Y motor
（
TILT
）
CH3
：
0 stop
，
1-255 adjusting Y motor rotation
；
4. channel 4 control Y bit
（
TILT
）
CH4
：
0 stop
，
1-255 adjusting Y motor bit
；
5. channel 5 control main dimming
CH5
：
0 off
。
1-255 main dimming from dark to bright
；
4. Maintaining
1.
The fixture should be kept dry to avoid working in wet conditions.
2.
Intermittent use will effectively prolong the life of this fixture.
3.
For a good ventilation and lighting effects, please clean the
fans ,fan nets and lens usually .
4.
To avoid damage this fixture, please don't use alcoholic or other
organic solvents to clean the fixture shell.
5. Precautions
1. In order to ensure the life of this fixture, please don't place this fixture where
is moisture or leakage, and don't operate the fixture at temperatures higher
than 40°please!
2. Don't place the fixture where is easy to loose or vibration-prone
3. To avoid risk of electric shock, please ask the professionals to maintain this
fixture.
4. When connect the fixture to power, the changes of power voltage should
be at-10% ~+10%,if higher, will reduce the life of the fixture, but if lower, will
effect the lightness.
5. Should need 20 Min. to fulling cool the light before re-use.
6. In order to ensure the normal use of this product, please read this manual
carefully.
6. Warning
·
Don’t disassemble and assemble the LED moving head.
·
Please Do not put the led moving head lamp in water or other any types liquids
and the metal (IP20).
·
Do not install the led moving head lamp in the humidity environment.
·
Should maintain the minimum 0.5 meter distance between the
led moving head
lamp and other neighboring object surface.
