3
4
7. Difficult processing
Question
Answer
The LED moving head lamp can not
start.
Inspects the fuse on the rear panel.
Although shines, but the LED moving
head lamp can not accept the instruction
of the controller.
Check the digital start address (sees
09th) and also check the connection
situation of the communication control
line the (to see 03rd).
LED moving head lamp only can work
intermittently.
Inspect the power supply and voltage is
whether normal.
Do not receive the DMX512 signal
Whether the signal lines do contact
good or broken.
The light beam appears gloomily.
Inspect the optics part is whether clean.
Other maintain work should by the specialist which has the
experience to carry on.
8. Declaration
Before delivery, this fixture have the performance intact, packaging integrity, and
all users should strictly observe the above warnings and operating instructions
for the matter, with any damage caused by misuse is not guaranteed within the
company, for damages caused by ignoring the manual instruction is not within
the scope of the distributors or dealers. Thank you for your cooperation!!
9.
Equipment and appendix
1. Led moving head light ----------------------------------1pcs
2. The Product of Instruction------------------------------1pcs
3. Power Cable ----------------------------------------------1pcs
4. XLR connector--------------------------------------------1unit
5. Bracket------------------------------------------------------1pcs
6. M6mm Screw----------------------------------------------2pcs
10. Technical parameters
Voltage: AC100-240V, 50Hz/60Hz
Power Consumption: 70 Watts
LED: 3W*18LED (Red:6pcs, Green:6pcs, Blue:6pcs)
LED Power: 3 Watts (x 18pcs)
LED Current: 750mA / 1 pc
LED Beam Angle: 25°
Pan:540°
Titl:180°
Operation Modes: DMX512, Manual, Sound, Master-Slave
DMX Control: 6/11 Channels
Control Panel: Digital 4 Character Alphanumeric
Maximum Ambient Temperature: 40° C
Gross Weight: 3.8 kg
Package Size: 25 x 22 x 29.5cm
11. Menu display function
Enter Menu down up
1. ADDR (address code setting)
：
A001-A512
2. SLND (master/
从
slave1/slave2 setting)
：
NAST,SL 1,SL 2
3. SOUN
（
sound control
）
：
0-100
4. AUTO (auto mode)
：
NO/ YES
