![Mizuho VACB-3006B Operator'S Manual Download Page 35](http://html1.mh-extra.com/html/mizuho/vacb-3006b/vacb-3006b_operators-manual_1812837035.webp)
Lateral tilt
Reverse mode
■
Left down
■
Right down
1. Press
of the control unit.
2. Press
and
simultaneously.
The tabletop will move to the right down position
as viewed from the auxiliary switch end.
NOTE
- The maximum angle achieved
in the left down and right
down position is 20° from the
level position.
If the tabletop is in the level
position (parallel to the floor)
the slide will be locked before
tilting begins. It takes about
1.5 seconds for the tabletop
slide to lock.
20°
20°
20°
20°
WARNING
Make sure the patient on the
table is secured when tilting
the table. Otherwise the patient
may fall off the table.
1. Press
of the control unit.
2. Press
and
simultaneously.
The tabletop will move to the left down position
as viewed from the auxiliary switch end.
K E E P C O R D C L E A R O F
M O V I N G P A R T S .
M A I N T E N E Z L E C O R D O N
D ’ A L I M E N T A T I O N É L O I G N É
D E S P I È C E S E N M O U V E M E N T .
CAUTION
ATTENTION
K E E P C O R D C L E A R O F
M O V I N G P A R T S .
M A I N T E N E Z L E C O R D O N
D ’ A L I M E N T A T I O N É L O I G N É
D E S P I È C E S E N M O U V E M E N T .
CAUTION
ATTENTION
1
2
2
2
2
1
Auxiliary switch
Auxiliary switch
31
4
Operation
Summary of Contents for VACB-3006B
