55
6
Operation
6.12 Returning to level
Returning the tabletop to level position
1.
Press
first and then
.
The operating table moves following the steps below and the tabletop
returns to the level position.
1. Trendelenburg, back plate bending, and leg plate bending
2. Lateral tilting
3. Left to right slide (center position) (MST-7300BX only)
z
If the tabletop is not level
When the tabletop does not return to the level and center positions even if the Level switch is pressed, then
actuate the level and center position correcting for each operating.
<E.g.: Lateral tilt level correcting>
Right down
Left down
Press the right and left lateral tilt switches to operate them to greatly exceed the level position. The lateral
tilt’s level position will be reset, and it will recognize the correct level position.
If the correct level position is not recognized even though this operation is performed, then request repairs
from your distributor or Mizuho.
NOTE
Elevation, fixing, and braking
do not function.