28
4
Operation
4.9 Sliding the tabletop
WARNING
Keep your hands away from
the gap of the frame during
the operation of the table.
You may get injured.
CAUTION
Do not move the tabletop to
the head direction from the
standard center position
with the leg plates flexed.
Leg plates may get damaged.
Leg plate
Sliding in the foot direction
1.
Hold down
ENERGIZE
and press
SLIDE FOOT
.
The tabletop slides in the foot direction.
TABLE UP
ENERGIZE
ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
LEVEL
BRAKE UNLOCK
REFLEX
FLEX
SLIDE HEAD
SLIDE FOOT
TABLE DOWN
BACK UP
BACK DOWN
TILT LEFT
TILT RIGHT
REV. TREND.
POWER BATT.
PILOT
MOT-5602BW
TREND.
310 mm
(12.2 in)
Foot direction
Sliding in the head direction
1.
Hold down
ENERGIZE
and press
SLIDE HEAD
.
The tabletop slides in the head direction.
TABLE UP
ENERGIZE
ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
LEVEL
BRAKE UNLOCK
REFLEX
FLEX
SLIDE HEAD
SLIDE FOOT
TABLE DOWN
BACK UP
BACK DOWN
TILT LEFT
TILT RIGHT
REV. TREND.
POWER BATT.
PILOT
MOT-5602BW
TREND.
220 mm
(8.7 in)
Head
direction
NOTE
•
Maximum travel in sliding
from the center position of
the tabletop is as follows.
Foot direction: 310 mm (12.2 in)
Head direction: 220 mm (8.7 in)
•
If the back plate is lower
than the level position, the
tabletop cannot be slid to
the leg direction from the
standard center position
and the buzzer will sound.
When moving up the back
plate higher than the level
position, the tabletop can
be slid to the leg direction.
Level
position
Leg
direction
Tabletop center
•
When sliding is operated
from the leg or head
direction to the opposite
direction, it will stop in the
center position. Once it
stops, release the switch
and press it once again; it
will be slid to the maximum
range.
•
The tabletop center position
is the position where the
side frame line and sliding
cylinder line are all aligned.
Line
Side frame
Sliding cylinder