18
4
Operation
4.2 Turning on/off the power
This procedure is different between the powers from the medical grade wall outlet and the battery.
When the medical grade wall outlet is used
z
Turning on the power
1.
Turn on the power switch on the base.
The power switch (green) and battery indicator light up.
2.
Press
ON/OFF
on the control unit.
The power lamp (green) on the control unit lights up and the power is
turned on.
TABLE UP
ENERGIZE
ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
LEVEL
BRAKE UNLOCK
REFLEX
FLEX
SLIDE HEAD
SLIDE FOOT
TABLE DOWN
BACK UP
BACK DOWN
TILT LEFT
TILT RIGHT
REV. TREND.
POWER BATT.
PILOT
MOT-5602BW
TREND.
NOTE
•
In an emergency or when
turning off the power completely,
disconnect the power cord from
the medical grade outlet.
•
If you press
ON/OFF
on the control
unit before turning on the power
switch on the base, the power
of the battery is turned on.
•
For the colors of the
indicator, Page 16.
NOTE
If a switch is continuously
pressed for 3 minutes or
more, its operation is halted.
The halt condition continues
for about 7 minutes.
Other switches other than
the halted switch can be
operated as usual.