Page 18
SECTION I INTRODUCTION
1-4. Floor Lock/Brake System
The floor lock/brake system consists of four
self-leveling, hydraulic brake cylinders which raise
and support the table base off from the casters.
Press the TABLE UP button on the pendant control
to set the table’s brakes. An electronic timer will ac-
tivate the brake system until the brakes are com-
pletely set, approximately 8-10 seconds.
NOTE
Activating any function button will acti-
vate the brake system. Using the
TABLE UP function to set the brakes
provides a visual assurance that the
brakes are locked without altering the
table position, except when emergency
brake is released.
