V1.2
8 |
P a g e
9
Installation procedure
Step
Part Number
Picture
Description
1.
A0011MT
And
440FT0077
a.
The 12-pin connector of the
“FM LTE Ext. Serial Harness
SR4” should already be
connected to the 12-pin
socket on the LTE Modem. If
not connect these two item
together.
b.
c.
Note:
it is also possible to
plug the other end of the
harness, the 10-pin
connector, into the modem.
This is incorrect and will not
allow the install to proceed.
2.
A0011MT
If there is anything
connected to the 10-pin
serial connector on the FM
3xxx, disconnect it and
connect it to the 10-pin side
of the LTE modem.
Then
Connect the 10-pin side of
the “FM LTE External Serial
Harness SR4” to the 10 pin
socket (serial port) on the
FM.
3.
A0016M
Connect the External LTE
blade antenna to the socket
on the LTE modem
Note:
It has the same
connector as the GPS
antenna on the FM 3xxx.
Leave the GPS antenna