Miura CMU-324HE, Operation Manual

Page: 3 / 60

Important Safety Information
i
Important Safety Information
Before using the Colormetry CMU-324HE, ensure that this Operation Manual is read and fully
understood; furthermore, the instructions given herein should be strictly observed during operation.
Within the Colormetry CMU-324HE, there are moving parts in which the human body may get
entangled and high-voltage sections that could lead to electric shocks. Failure to use the Colormetry
CMU-324HE in the appropriate manner can, therefore, result in death, injury, the outbreak of fire, and
other serious accidents.
In order to ensure that tasks undertaken during operation and maintenance of the Colormetry CMU-
324HE can be completed safely, it is critical that all dangerous and hazardous parts of this device be
confirmed in advance. Here at MIURA, it is practically impossible to anticipate all potentially
dangerous situations, and therefore, this Operation Manual deals only with known hazards. A higher
level of safety can be achieved by careful observation of the warnings and instructions set forth
herein.
Safety-related warnings are classified according to the following three levels, and notification of these
warnings is provided within this Operation Manual and using warning labels on the device itself.
Indicates an imminently dangerous situation which leads to serious
injury or death to the user, if the product is mishandled.
Indicates a situation which might cause serious injury or death to
the user, if the product is mishandled.
Indicates a situation which might cause minor injury to the user or
the occurrence of physical damage only, if the product is
mishandled.
If any part used in the product fails, contact your dealer or MIURA sales office to have it replaced with
a genuine part. Using parts with other model numbers may reduce the safety.
It should be noted that unauthorized alteration of the Colormetry CMU-324HE and repair
procedures other than those described herein can pose a serious safety risk. Never customize or
repair the device without permission from MIURA.