OUTPUT
9
9
By connecting a dedicated cable (part No. 965464, option) to the
OUTPUT connector on the side panel, input data GO/NG judgment or
measurement data output via RS-232C can be performed.
1. GO/
NG Judgment Output
When a GO/
NG judgment cable (part No. 965516, option) is
connected, and the limit values are set in Mode 0, Mode 1, or Mode 2,
output is done through an open collector.
2SC4047 or equivalent
V
CEO
(max) = 50 V
IC (max) = 100 mA
2. RS-232C Compliant Output
This output is performed as an RS-232C compliant signal from the
[DATA] key, timer input, a command from the RS-232C input, foot
switch, or the data output key of the measuring device. However, data
output such as the results of the processing performed in the DP-1VR,
is not performed. Note that an RS-232C conversion cable (part No.
09EAA084) is required when this output is used.
- 48 -
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30