FUNCTIONAL OUTLINE
3. Timer Input Function
This function is used to automatically fetch data from the measuring
device at given intervals. This function is activated by pressing the
[FEED] key while the [PRINTER ON/OFF] key is held down, and the
interval time can be set by then pressing a key. To disable this function,
press the [CL] key while holding down the [PRINTER ON/OFF] key.
Printer ON/OFF
CL key
Press
Release
Press
Release
NOTES
1. If 0.25 s or 1 s has been set with the interval timer, do not
use the [CL], [CE] and [STAT] keys, as this may cause
malfunction.
2. If, when the interval timer operation is switched off, data
still remains in the buffer, this data is printed out in some
cases.
3. If wishing to change the interval time during data fetching
through the interval timer, exit the mode once to clear the
data, and then set the new interval time.
The various keys and interval times are listed below.
Key Interval
time
STAT
0.25 s
TOL.LIMIT
1 s
CE
5 s
CL
30 s
DATA
1 min
FEED 30
min
PRINTER ON/OFF
60 min
NOTE
If 0.25 s or 1 s has been set, the measurement data cannot be
printed out. Also, if 0.25 s has been set, the data input buzzer
does not sound.
- 22 -
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30