(b) In case of type 2 (Install to motor pack)
Notes:
1. This drawing shows type 2 of piping installation. As part of condenser and evaporator unit, refer to page 79.
2. Charging mass of refrigerant.
Charging quantity must be measured when engine runs at 1000min
-1
.
3. Compressor outlet and inlet pipe should be fixed because water absorption power of oil is high.
4. Pipe should be fixed lastly the same as compressor pipe. Because dryer and sight glass are already installed.
Connect quickly when its raining.
– 80 –
Model
TDJ300D
TDJ430D
R404A
R404A
1.7
2.1
1.7
2.1
Refrigerant
Changing mass of
refrigerant (kg)
Type 1 Type 2
