3 SendOwnNum (Outgoing Caller ID)
Default 1 Enable
Determines if your phone number is sent to the
person you are calling for display. This feature can
be enabled or disabled. Set this feature to Disable
if you do not want your number displayed on the
receiving person’s phone.
1) Press MENU
(Call Set -
SendOwnNum).
2) Press UP or DOWN to change the setting.
3) Press
to select the setting.
•
If you select Disable, the screen will ask you to
enter a feature code, supplied by some
network service providers. Press
.
•
Once programmed, this code will be sent with
any call except emergency or voice mail.
•
If you selected any restriction levels except No
Restriction, feature codes cannot be entered.
See Menu 6 1 (Security - Restrict) on page 46.
•
When traveling outside your local network
service area, this feature may not work or let
you make a call. Set feature to Enable.
•
This feature is supported by your phone, but
may not be supported by your network service
provider. Call your network service provider for
detailed instructions on using this feature.
ENTER
ENTER
3
DEF
4
GHI
42
