Chapter 6
PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
6-8
Changing Governor Oil Filter
To drain oil or change oil filters, wear gloves. Hot engine oil and parts may cause burns.
1 Place the oil receiving tray under the governor
filter.
2 Loosen the air vent plug and remove the drain
plug. Drain oil in the filter.
3 Remove the oil pipe from the center bolt.
4 Remove the center bolt and removet the case
from the bracket. Remove the used element
from the case.
5 Put a new element in the case using the center
bolt.
6 Install the case to the filter bracket. Tighten the
center bolt.
7 Install the oil pipe to the center bolt.
8 Install the drain plug.
9 Remove the air vent plug and fill up the filter with
engine oil. Install the air vent plug.
10 After filling oil up, reinstall the air vent plug.
fig.6-12 Governor oil filter
Air vent plug
Drain plug
Oil pipe
fig.6-13 Changing governor oil filter
