manualshive.com logo in svg

Mitsubishi QJ71GP21-SX, Reference Manual

The Mitsubishi QJ71GP21-SX Reference Manual is a comprehensive user guide for this high-performance module. Packed with detailed instructions and troubleshooting tips, this manual is available for free download from manualshive.com. Discover how to maximize the potential of your Mitsubishi product with this essential resource.

Share
Download
background image

Index

 - 1

9

DE

DICA

T

E

D 

INS

T

RUCT

IONS

10

T

R

OUB

L

E

S

HO

OT

IN

G

APPENDI

CES

INDEX

 

INDEX

[A]

Applicable systems•••••••••••••••••••••••••••••••••••••• 2-7
Assurance of cyclic data integrity ••••••••••••••••••• 4-19
Automatic return •••••••••••••••••••••••••••••••••••••••• 4-46

[B]

Block data assurance per station•••••••••••••••••••• 6-26

[C]

Cable fault detection ••••••••••••••••••••••••••••••••••• 4-47
Cable insertion error detection •••••••••••••••4-47,10-45
CC IE Control Network Diagnostics••••••••••••••• 10-26
CC-Link dedicated instruction••••••••••••••••••••••••• 9-2
CC-Link dedicated instruction transmission 
delay time •••••••••••••••••••••••••••••••••••••••••••••••• 7-18
Change of transfer target CPU-side device ••••••• 6-37
Changing number of transient 
transmissions••••••••••••••••••••••••••••••••••••• 4-43,6-27
Channels •••••••••••••••••••••••••••••••••••••••••••••••••• 9-5
Circuit test•••••••••••••••••••••••••••••••••••••••••••••••• 5-22
Clock setting•••••••••••••••••••••••••••••••••••••••• 4-42,9-1
Clock setting from GX Developer ••••••••••••••••••• 4-42
Communication by LB/LW ••••••••••••••••••••••••••••• 4-3
Communication by LX/LY •••••••••••••••••••••••••••••• 4-9
Communication test •••••••••••••••••••••••••••••••••••• 5-33
Communication with another station's 
programmable controller ••••••••••••••••••••••••• 4-33,9-1
Communication with CC-Link IE controller 
network compatible devices ••••••••••••••••••••• 4-33,9-1
Comparison between CC-Link IE controller 
network and MELSECNET/H •••••••••••••••••••• App-43
Comparison (CC-Link IE controller network, 
MELSECNET/H) •••••••••••••••••••••••••••••••••••• App-43
Connection cable ••••••••••••••••••••••••••••••••••••2-5,3-1
Connector specifications ••••••••••••••••••••••••••••••• 3-1
Constant link scan••••••••••••••••••••••••••••••• 4-25,6-26
Control station••••••••••••••••••••••••••••••••••••••A-16,6-5
Control station duplication ••••••••••••••••••••4-48,10-56
Control station switching •••••••••••••••••••••••••••••• 4-44
Control station switching time ••••••••••••••••••••••••A-16
Cyclic data retention time for system switching in 
redundant system •••••••••••••••••••••••••••••••••••••• 7-19
Cyclic transmission•••••••••••••••••••••••••••••••••••••• 4-1
Cyclic transmission delay time •••••••••••••••••••••••• 7-6
Cyclic transmission punctuality 
assurance ••••••••••••••••••••••••••••••••••••••••• 4-23,6-27

[D]

D LINK LED••••••••••••••••••••••••••••••••••••••••• 5-5,10-5
Data link ••••••••••••••••••••••••••••••••••••••••••••••••••A-15
Data link monitoring time••••••••••••••••••••••••••••••• 6-7
Dedicated instruction ••••••••••••••••••••••••••••• 4-35,9-1
Dedicated link instruction •••••••••••••••••••••••••••••• 9-1

Dedicated link instruction transmission delay 
time••••••••••••••••••••••••••••••••••••••••••••••••••••••••7-13
Delay time••••••••••••••••••••••••••••••••••••••••••• 7-6,7-13
Direct access to link devices •••••••••••••••••••••••••4-13
Disconnection •••••••••••••••••••••••••••••••••••••••••• A-16

[E]

Equal assignment ••••••••••••••••••••••••••••••••••••••6-11
Error code•••••••••••••••••••••••••••••••••••••• 10-14,10-37
ERR. LED ••••••••••••••••••••••••••••••••••••••••••••••••• 5-5
External power supply •••••••••••••••••••••••••••• 3-1,4-54
EXT.PW LED ••••••••••••••••••••••••••••••••••••••• 5-5,10-3

[F]

Function lists ••••••••••••••••••••••••••••••••••••••••••••• 3-3
Function version ••••••••••••••••••••••••••••••••••••••••2-10
Functional upgrade••••••••••••••••••••••••••••••••• App-38

[G]

Group ••••••••••••••••••••••••••••••••••••••••• A-16,4-40,6-4
Group cyclic transmission•••••••••••••••••••••• 4-26,6-21

[H]

Hardware test •••••••••••••••••••••••••••••••••••••••••••• 5-9
H/W Information••••••••••••••••••••••••••••••••••••••• 10-38

[I]

Identical point assignment ••••••••••••••••••••••••••••6-12
Implementation and installation••••••••••••••••••••••• 5-1
IN connector •••••••••••••••••••••••••••••••••••••••• 5-4,5-20
Interlink transfer•••••••••••••••••••••••••••••••••• 4-28,6-56
Internal current consumption (5V DC) ••••••••••••••• 3-1
Interrupt request to CPU module ••••••••••••• 4-55,6-50
Interrupt setting and request •••••••••••••••••• 4-55,6-50
I/O master station•••••••••••••••••••••••••••••••••• 4-9,6-18

[L]

LB/LW settings ••••••••••••••••••••••••••••••••••••••••••• 6-9
LED••••••••••••••••••••••••••••••••••••••••••••••••••• 5-5,10-1
Link device •••••••••••••••••••••••••••••••••••••••••••••••• 4-1
Link direct device •••••••••••••••••••••••••••••••••••••••4-13
Link input (LX)•••••••••••••••••••••••••••••••••••••••••••• 4-9
Link output (LY) •••••••••••••••••••••••••••••••••••••••••• 4-9
Link refresh ••••••••••••••••••••••••••••••••••••••••••••••4-12
Link refresh time ••••••••••••••••••••••••••••••••••••••••• 7-2
Link register (LW)•••••••••••••••••••••••••••••••••••••••• 4-3
Link relay (LB)•••••••••••••••••••••••••••••••••••••••••••• 4-3
Link scan time •••••••••••••••••••••••••••••••••••••••••••• 7-1
Link special register (SW)•••••••••••••••••••8-37,App-16
Link special relay (SB)•••••••••••••••••••••••• 8-37,App-1
Logging ••••••••••••••••••••••••••••••••••••••••••••••••• 10-34
Loopback•••••••••••••••••••••••••••••••••••••••••••••••••4-45
LX/LY settings•••••••••••••••••••••••••••••••••••••••••••6-17

Summary of Contents for QJ71GP21-SX











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for QJ71GP21-SX

Bartlett 700 Series Operation Manual preview
700 Series
Brand: Bartlett Pages: 30
2VV ESSENSSE NEO COMFORT Installation And Operation Instractions preview
ESSENSSE NEO COMFORT
Brand: 2VV Pages: 21
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Brand: 2VV Pages: 27
IBM 1620 Manual Of Instruction preview
1620
Brand: IBM Pages: 12
K&K M9700 Installation Instructions Manual preview
M9700
Brand: K&K Pages: 10
Baby Jogger VUE Assembly Instructions Manual preview
VUE
Brand: Baby Jogger Pages: 24
Baby Jogger POD Assembly Instructions Manual preview
POD
Brand: Baby Jogger Pages: 16
Baby Jogger city select LUX Assembly Instructions Manual preview
city select LUX
Brand: Baby Jogger Pages: 20
Baby Jogger CITY ELITE SINGLE Instructions For Use Manual preview
CITY ELITE SINGLE
Brand: Baby Jogger Pages: 24
Baby Jogger CITY MINI 2 Assembly Instructions Manual preview
CITY MINI 2
Brand: Baby Jogger Pages: 147
CALEFFI 543 Series Quick Start Manual preview
543 Series
Brand: CALEFFI Pages: 2
CALEFFI 5350 Series Manual preview
5350 Series
Brand: CALEFFI Pages: 12
Caliber RC20 User Manual preview
RC20
Brand: Caliber Pages: 6
Danfoss VLT AQUA Drive FC 202 Installation Manual preview
VLT AQUA Drive FC 202
Brand: Danfoss Pages: 124
Danfoss AME 55 Installation Manual preview
AME 55
Brand: Danfoss Pages: 2
Danfoss AME 110 NL Datasheet preview
AME 110 NL
Brand: Danfoss Pages: 8
Danfoss AK-CH 650 User Manual preview
AK-CH 650
Brand: Danfoss Pages: 114
Danfoss ECL Comfort 300 Quick Manual preview
ECL Comfort 300
Brand: Danfoss Pages: 2

Brands by name

Popular brands

Load more brands