10
- 56
10.4 Checking the Error Description with the CC IE Control Network Diagnostics
10.4.8 Control station duplication
10
TROUBLESHOOTING
10.4.8
Control station duplication
The following explains the procedures to be taken when control station is duplicated.
(1) Turning ON all stations simultaneously
Stations other than duplicated control stations do not receive parameters since they
recognize that no control station exists in a network. (
Figure 10.43 Turning ON all stations simultaneously
Select the own station.
Since current control station is not displayed,
you can see that no control station exists.
An error has occurred in station No.1.
Click the [Error details] button.
The Error factor indicates that the control station
status of station No.1 is duplicated.
Take corrective actions according to the
troubleshooting.
Control
station
No.1
Normal station
No.2
Control station
No.4
Normal station
No.3
Selected
station
Control station
No.1
Normal station
No.2
Control
station
No.4
Normal station
No.3
Selected
station
Select the station No.4.
An error has occurred in station No.4.
Click the [Error details] button.
The Error factor indicates that the control
station status of station No.4 is duplicated.
Take corrective actions according to the
troubleshooting.
Summary of Contents for QJ71GP21-SX
