Mitsubishi QJ71GP21-SX, Reference Manual

Page: 98 / 650

4
- 42 4.2 Transient Transmission Function
4.2.4 Clock setting from GX Developer
4
FUNCTIONS
4.2.4 Clock setting from GX Developer
In GX Developer, the clock of the CPU module that is connected to the network can be set
up.
Setting the clock time for multiple stations is also available.
1) Select [On line] - [Set time] from the menu.
2) The [Set time] dialog box is displayed.
3) Set the following items and click .
POINT
(1) The clock time is set up regardless of the ON/OFF status of SM210 (Clock
data set request) of the CPU module. (The ON/OFF status of SM210 does not
change after execution of the time setup.)
(2) The set time data are stored in SD210 to SD213 (Clock data) when SM213
(Clock data read request) of the CPU module turns ON.
(3) [Set time] will generate a time error equivalent to the transfer time.
Figure 4.47 [Set time] dialog box
Table 4.14 Setting items in the [Set time] dialog box
Item Description
Connection target
information
Displays the connection target information.
Clock setup Set the date, time, and day of the week.
Specify execution
target
Set the target for executing [Clock setup].
• Currently specified station: Executed to the station which is specified as connection
target.
• All stations: Executed to all stations in the network specified by [Specify execution
unit].
• Specific group: Executed to the specified group No. in the network specified by
[Specify execution unit].