16
5 Mounting/Dismantling
5.1 Mounting the modules
Base unit
Module fixing
projection
Module fixing hole
Module
connector
Base unit
Module
mounting
lever
Base unit
Module fixing hook
Base unit
Module fixing
projection
Module fixing hole
Module
Module
mounting lever
Module
fixing
projection
Module fixing hole
Module fixing
projection
Module fixing hole
• When installing the module, always insert the module fixing projection into the module
fixing hole of the base unit.
At that time, securely insert the module fixing projection so that it does not come off from
the module fixing hole.
If the module is forcibly installed without the latch being inserted, the module connector and
module will be damaged.
• When using the modules in a place where there is large vibration or impact, screw the
module to the base unit.
Module fixing screw: M3
×
12 (user-prepared)
Screw the Motion CPU module to the main base unit using supplied fixing screws.
• Do not install/remove the module onto/from base unit or terminal block more than 50 times,
after the first use of the product. Failure to do so may cause the module to malfunction due
to poor contact of connector.
Summary of Contents for Q173DSXY
Page 10: ...9 MEMO ...
Page 23: ...22 MEMO ...
