13
8. Function Selection
)XQFWLRQVHOHFWLRQRIUHPRWHFRQWUROOHU
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when
needed.
Item 1
Item 2
Item 3 (Setting content)
1. Change Language
(“CHANGE LAN-
GUAGE”)
Language setting to display
• Display in multiple languages is possible
2. Function limit
(“FUNCTION SELEC-
TION”)
(1)
Operation function limit setting (operation lock) (“LOCKING
FUNCTION”)
• Setting the range of operation limit (operation lock)
(2)
Use of automatic mode setting (“SELECT AUTO MODE”)
• Setting the use or non-use of “automatic” operation mode
(3)
Temperature range limit setting (“LIMIT TEMP FUNCTION”)
• Setting the temperature adjustable range (maximum, minimum)
3. Mode selection
(“MODE SELEC-
TION”)
(1)
Remote controller main/sub setting (“CONTROLLER MAIN/
SUB”)
• Selecting main or sub remote controller
*
When 2 remote controllers are connected to 1 group, 1 controller
must be set to sub.
(2)
Use of clock setting (“CLOCK”)
• Setting the use or non-use of clock function
(3)
Timer function setting (“WEEKLY TIMER”)
• Setting the timer type
(4)
Contact number setting for error situation (“CALL.”)
• Contact number display in case of error
• Setting the telephone number
4. Display change
(“DISP MODE SET-
TING”)
(1)
Temperature display °C/°F setting (“TEMP MODE °C/°F”)
• Setting the temperature unit (°C or °F) to display
(2)
Room air temperature display setting (“ROOM TEMP DISP
SELECT”)
• Setting the use or non-use of the display of indoor (suction) air tempera-
ture
(3)
Automatic cooling/heating display setting (“AUTO MODE
DISP C/H”)
• Setting the use or non-use of the display of “Cooling” or “Heating” dis-
play during operation with automatic mode
