Mitsubishi P91E, Operation Manual

Page: 21 / 31

18
Printing the set conditions
You can print the set conditions of BRT, CONT and GAMMA
under the image.
1
Turn on the power.
•
Press the "POWER" switch to turn on
the power.
3
Set to the stand-by status.
2
Make a setting to print the set conditions.
•
While holding down the "
}
" of BRT
button, press the "
{
" of BRT button for
approx. 3 seconds till a "Peep" sounds.
" " is displayed on the indicator.
The set mode will not be lost even if the power is turned off.
OPEN
BRT CONT
GAMMA PRT-SIZE COPY/FEED
PRINT
•
To select whether the printing conditions
are printed or not, press the "
}
" or
"
{
" of CONT button.
" " or " " is displayed on the indicator.
•
While holding down the "
}
" of BRT
button, press the "
{
" of BRT button
for approx. 3 seconds till a "Peep" sounds.
" " is displayed on the indicator.
OPEN
BRT CONT
GAMMA PRT-SIZE COPY/FEED
PRINT
4
Print the set conditions.
•
Press the "PRINT" button.
Refer to the pages 11 to 12 for
printing procedure.
mode
Printing
Not printing
indicator
Example
A
BRT:-3 CNT:+8 GMA: 5
Set conditions