1-124
Mitsubishi Multi Communication System
1
A REG station is received if an AF station cannot be received.
If a REG station can be received, “REG” is displayed on the
source plate.
NOTE
●
If there is no REG station, the broadcasting station stored
in the preset channel is received.
●
The station is not stored in the preset channel.
●
With REG stations, the contents of the broadcast may vary
according to the time slot.
Traffic Information Standby
E08111300014
This function is for automatically receiving stations that broad-
cast traffic information when the traffic information broadcast
starts.
NOTE
●
The traffic information standby must have been set to
[On] in advance. Refer to “Automatic Notification”
(p.1-312).
●
The traffic information standby does not function during
LW, MW or audio OFF.
When there is a traffic information interrupt while the Navi
Screen is being displayed
Traffic information is displayed on the source plate, and the
reception of traffic information is started.
BK-MMCSE12007EN_Combi01_ENG_NLD.book Page 124 Thursday, November 16, 2006 4:13 PM
