Mitsubishi MZ360360EX, Installation Instructions Manual

Page: 22 / 51

- 22 -
4) Connect the quick splice connector with blue/red
wire to the blue/red wire from the No. 18 terminal of
the 24-pin white connector connected to the
ETACS-ECU.
5a) On vehicles with theft alarm system, connect the
quick splice connector with blue/white wire to the
blue/white wire from the No. 6 terminal of the 24-pin
white connector connected to the ETACS-ECU.
5b) On vehicles without theft alarm system, do as
follows:
1. Remove the 38-pin connector of the front harness
together with its mounting bracket from the vehicle.
2. Connect the quick splice connector with blue/white
wire to the blue/white wire from the No. 4 terminal of
the 38-pin connector.
6) Bundle the excess lengths of the wires to the quick
splice connectors and fix them to the vehicle harness
using the tie-wraps
⑦ .
Never separate the 38-pin connector halves.
Caution
!