Mitsubishi LANCER EVOLUTION-IV 1998, Workshop Manual, Page: 456 / 526

BASIC BRAKE SYSTEM –
Front Brake
35A-7
FRONT BRAKE
REMOVAL AND INSTALLATION
Except for the followings, use the same procedure as that
for conventional disc brake.
INSTALLATION SERVICE POINT
"
A
A
DISC BRAKE ASSEMBLY INSTALLATION
Follow the conventional procedures except the standard value
for the disc brake drag force.
Standard value (disc brake drag force):
51 N {5.2 kgf} <EVOLUTION-IV>
69 N {7.0 kgf} <EVOLUTION-V>
DISASSEMBLY AND REASSEMBLY
NOTE
On EVOLUTION-IV, follow the same procedure as conventional.
On EVOLUTION-V, disassemble in the order shown.
1
2
3
4
5
6
7
8
Grease: Repair kit grease
6
7
5
1
4
Disassembly steps
1. Clip
2. Pin
3. Cross spring
4. Pad & wear indicator assembly 5. Pad assembly
6. Air bleeder screw
7. Cap
8. Disc brake caliper assembly