- 15 -
a
b
c
A
B
MAIN PLATE ASSY
GUIDE LAMP
Removing Direction
Installing Direction
Fig. 2-20
C
BRAKE SPRING
Catch
Insert the BRAKE SPRING
under the Catch.
BRAKE (TU)
Fig. 2-19-3
2-20.GUIDE LAMP
SET POSITION :
Normal
Remove the following parts before replacing the GUIDE
LAMP. Refer to the corresponding items to install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH ASSY (Item 2-17)
• BRAKE CAM PLATE (Item 2-19)
(Removal)
1. Release the catch (
a
) of the GUIDE LAMP shown in
the Fig. 2-20.
2. Rotate the GUIDE LAMP in the direction shown by the
arrow
A
(counterclockwise, when viewed from the
bottom) to match the longest slit (
c
) of the MAIN
PLATE ASSY with the longest arm (
b
) of the GUIDE
LAMP shown in the Fig. 2-20. Pull it out downward to
remove it.
(Installation)
1. Clean the dirt on the GUIDE LAMP with a VIDEO
HEAD cleaning cloth.
Note:
Never use solvent such as alcohol to clean the
GUIDE LAMP.
2. Insert the GUIDE LAMP in the Fig. 2-20, matching the
longest arm (
b
) of the GUIDE LAMP with the longest
slit (
c
) of the MAIN PLATE ASSY.
3. Rotate the GUIDE LAMP in the direction shown by the
arrow
B
(clockwise, when viewed from the bottom) to
match the arm (
a
) of the GUIDE LAMP shown in the
Fig. 2-20 with the longest slit (
c
) of the MAIN PLATE
ASSY.
Note :
Clean the dirt on the GUIDE LAMP with a VIDEO
HEAD cleaning cloth if necessary.
