- 8 -
2-12.REV UNIT (TU),
REV UNIT (SP)
SET POSITION :
Upside down
(Removal)
1. Release the two catches (
a
) of the REV UNIT (TU)
shown in the Fig. 2-12 to remove the REV UNIT (TU).
2. Release the two catches (
b
) of the REV UNIT (SP)
shown in the Fig. 2-12 to remove the REV UNIT (SP).
(Installation)
1. Clean the dirt on the transparent part of the REV UNIT
(TU) with a VIDEO HEAD cleaning cloth.
Note :
Never use solvent such as alcohol to clean the
REV UNIT (TU).
2. Install the REV UNIT (TU) shown in the Fig. 2-12.
3. Clean the dirt on the transparent part of the REV UNIT
(SP) with a VIDEO HEAD cleaning cloth.
Note :
Never use solvent such as alcohol to clean the
REV UNIT (SP).
4. Install the REV UNIT (SP) shown in the Fig. 2-12.
2-13.MODE POSITION UNIT
SET POSITION
: Upside down
(Removal)
1. Release the two catches (
a
,
b
) of the MODE
POSITION UNIT shown in the Fig. 2-13 to remove the
MODE POSITION UNIT.
(Installation)
1. Install the catch (
b
) of the MODE POSITION UNIT
shown in the Fig. 2-13.
2. Install the catch (
a
) of the MODE POSITION UNIT
shown in the Fig. 2-13.
a
a
b
b
REV UNIT (TU)
REV UNIT (SP)
Fig. 2-12
a
b
MODE POSITION UNIT
Fig. 2-13
