- 6 -
4. Removal of DECK ASSY
1. Remove the Top Cover.
(Refer to Para. 1 of the DISASSEMBLY.)
2. Remove the Front Panel.
(Refer to Para. 2 of the DISASSEMBLY.)
3. Short-circuit the cathode side of D927 and the GND of
the DECK ASSY using the jig shown below.
Note:
The CAPSTAN MOTOR may be damaged without
above short circuit.
4. Remove the two screws (
a
) shown in Fig. 4 and raise
the Shield Cover to remove it.
5. Remove the four screws (
b
) shown in Fig. 5.
6. Disconnect the Connectors MA, MD, MH and ML.
7. Release the two catches (
c
) shown in Fig.5 and raise
the the DECK ASSY to remove it.
Note1:
Remove the DECK ASSY paying attention to the
Connectors MC and MF under it.
Note2:
Short-circuit the cathode side of D927 and the Shield
Case using the jig shown below before attaching the
DECK ASSY.
a
Shield Cover
Fig. 4
b
b
c
DECK ASSY
Connector MC
Connector MF
D927
Fig. 5
Jig (Part No. : 859C548O10)
3W 330
Ω
