Mitsubishi HS-HD1100U, Service Manual

Page: 29 / 92

- 14 -
Hole
MAIN CAM
F/L PLATE
Boss
Fig. 2-18-2
B
A
b
b
a
a
a
b
b
BRAKE CAM PLATE
MAIN CAM
Fig. 2-19-1
70mm
40mm
130mm
99mm
BRAKE CAM PLATE
Back
Apply GREASE (MOLYKOTE G PASTE) to the points .
Back
Back
Back
Fig. 2-19-2
3. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the points on the MAIN PLATE ASSY specified in the
Fig. 2-18-1.
4. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the points on the DOOR ARM specified in the Fig. 2-
18-1.
5. Install the DOOR ARM.
6. Match the Hole in the MAIN CAM with the Hole in the
MAIN PLATE ASSY shown in the Fig. 2-18-2.
7. Install the F/L PLATE shown in the Fig. 2-18-1 from
the front side (ARM (TU) side).
8. Insert the Boss of the F/L PLATE shown in the Fig. 2-
18-2 into the Groove of the MAIN CAM.
2-19.BRAKE CAM PLATE
SET POSITION : Normal
Remove the following parts before replacing the BRAKE
CAM PLATE. Refer to the corresponding items to install
them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH UNIT (Item 2-17)
(Removal)
1. Rotate the MAIN CAM in the Fig. 2-19-1 in the
direction shown by the arrow
A
. And move the
BRAKE CAM PLATE so that the three catches (
a
) of
the MAIN PLATE ASSY can be released.
2. Remove the BRAKE CAM PLATE.
(Installation)
1. Apply GREASE (MOLYKOTE G PASTE)
[859D055O50] to the points on the BRAKE CAM
PLATE specified in the Fig. 2-19-2.
2. Hook the BRAKE SPRING shown in the Fig. 2-19-3 to
the catch of the BRAKE (TU).
3. Install the BRAKE CAM PLATE, inserting the six
Guide Pins (
b
) shown in the Fig. 2-19-1 into the slits
of the BRAKE CAM PLATE.
4. Move the BRAKE SPRING in the Fig. 2-19-3 in the
direction of the arrow
C
to release the Catch of the
BRAKE (TU) and insert the BRAKE SPRING under
the Catch.
5. Rotate the MAIN CAM shown in the Fig. 2-19-1 in the
direction shown of the arrow
B
. And move the
BRAKE CAM PLATE to hook it to the three catches
(
a
) of the MAIN PLATE ASSY.