Mitsubishi FX2N-32CCL, User Manual

Page: 9 / 56

FX
2N
-32CCL CC-Link Interface Block Introduction 1
1-1
1. Introduction
The CC-Link interface block FX
2N
-32CCL is an interface block which connects the FX
0N
/FX
2N
/FX
2NC
PC to
the CC-Link.
1.1 Outline of product
Applicable PC
The FX
2N
-32CCL can be connected as a special extension block of the FX
0N
/FX
2N
/FX
2NC
Series micro PC.
Control instruction
The buffer memory of the FX
2N
-32CCL is read and written by FROM/TO instructions.
Connection to CC-Link
The FX
2N
-32CCL is connected as a remote device station to the CC-Link system.
Shielded twisted pair cables are used for wiring.
Number of I/O points
Eight I/O points (including input and output) are occupied in the FX PC.
However, the capacity of the 5 V DC power supplied from the PC is limited.
The current consumption of 5 V DC in the FX
2N
-32CCL is 130 mA. Make sure that the total current consump-
tion of 5 V DC including other special blocks does not exceed the criteria.
Station No. and number of stations
Station No. : 1 to 64 (rotary switch)
Number of stations: 1 to 4 (rotary switch)