1-23
MAIN CONTROLLER
Setup Options (Group 2)
Option
Title of Option
Description
Range
Default
#
value
When the auxiliary input signal is
0: Turned off
on, the controller will limit top speed
1: Disable lift (input; low volts)
Auxiliary Input for
or inhibit lifting or reduce power
2: Speed limit (input; low volts)
#11
Lift and Drive
according to the selection. The speed
3: Power reduction (input; low volts)
0
Speed 1
limit set by this operation is prior to
4: Disable lift (input; high volts)
#7 top travel speed limit.
5: Speed limit (input; high volts)
6: Power reduction (input; high volts)
#12
Auxiliary Travel
Travel speed limit for #11
48 V type: 5 to 16 km/h
10
Speed Limit 1
#13
Auxiliary Power
Power reduction ratio for #11
0 to 99%
0
Reduction 1
Auxiliary Input for
#14
Lift and Drive
Same as #11
Same as #11
0
Speed 2
#15
Auxiliary Travel
Travel speed limit for #14
48 V type: 5 to 16 km/h
10
Speed Limit 2
#16
Auxiliary Power
Power reduction ratio for #14
0 to 99%
0
Reduction 2
Auxiliary Input for
#17
Lift and Drive
Same as #11
Same as #11
0
Speed 3
#18
Auxiliary Travel
Travel speed limit for #17
48 V type: 5 to 16 km/h
10
Speed Limit 3
#19
Auxiliary Power
Power reduction ratio for #17
0 to 99%
0
Reduction 3
If a drive motor stalls for the amount
#20
Stall Timer
time set by this option, the motor
2 to 10 sec
5
current gets to 0.
1: Brake regen (accelerator must be
#21
Regen Function
2 regen modes
off)
2
2: Accelerator regen (also called
"auto reg")
#22
Regen Adjustment
5 characteristic curves of lever regen
1 to 5
4
for Lever Reg
#23
Regen Adjustment
5 characteristic curves of auto regen
1 to 5
3
for Auto Reg
#24
Chat Timer
Sets the amount time before the truck
0 to 40 sec
20
enters chat mode.
If the operator leaves the seat for the
#25
Seat Switch Timer
amount of time set by this option,
3 to 15 sec
5
the line contactor will turn off.
If the truck reaches to the speed set
#26
Speed Alarm
by this option, the controller outputs
48 V type: 5 to 16 km/h
12
a speed alarm signal.
Tire Size
Adjusts the tire diameter. It changes
#27
Adjustment
the truck's speed recognition and the
0 to 40
20
speedometer.
