Mitsubishi DPLUS 74SB -BKB, Service Manual

Page: 16 / 176

1-12
10
Monitor Diamond Plus 74
SB
Notes
Specifications Monitor
Picture Tube
Diagonal: 17 inch 90 ° deflection, 0.25 mm grille pitch,
Viewable Image Size: 16 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
® screen.
Input Signal
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors
Analog input: Unlimited number of Colors Depends on display card used.
Synchronization
Horizontal: 30 kHz to 70 kHz Automatically
Range
Vertical: 50 Hz to 120 Hz Automatically
Resolutions Supported
640 x 480 @ 60 to 120 Hz Some systems may not support
Resolution based on horizontal and 800 x 600 @ 50 to 110 Hz all modes listed.
vertical frequencies only 832 x 624 @ 50 to 106 Hz
1024 x 768 @ 50 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 864 @ 50 to 77 Hz
recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 66 Hz optimal display performance.
Active Display Area
Horizontal: 315 mm/12.4 inches Dependent upon signal timing used,
(Factory Setting)
Vertical: 236 mm/9.3 inches and does not include border area.
Active Display Area
325 mm/12.8 inches Dependent upon signal timing used,
(Full Scan)
244 mm/9.6 inches and does not include border area.
Power Supply
AC 100 – 240 V, 50-60 Hz
Current Rating
1.5A @ 100-240 V
Dimensions
397 mm (W) x 392 mm (H) x 415.5 mm (D)
15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
Weight
16.8 kg
37.0 lbs
Environmental Considerations
Operating Temperature: +5
°
C to +35
°
C / +50
°
F to +90
°
F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
Storage Temperature: -20 ° C to +60 ° C / -4 ° F to +140 ° F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
Specifications