Mitsubishi Diamond Plus 93SB, Service Manual, Page: 28 / 124

4-2
1. Adjustment & Inspection Tools
(A) Color Analyzer (B) Signal Generator CHROMA 2235 or compatible
(C) Multi Meter (D) Hi-Voltage Probe
(E) Convergence Meter (F) Degaussing Probe
(G) Power Meter
2.
Timing Table (Factory Mode –18 Modes)
MODE RESOLUTION H-SYNC EREQ. V-SYNC FREQ H . POLARITY V . POLARITY
1 VGA400 31.4KHz 70Hz - +
2 VGA640*480 31.4KHz 60Hz - -
3 640*480(75) 37.5KHz 75Hz - -
4 640*480(85) 43.2KHz 85Hz - -
5 800*600(75) 46.8KHz 75Hz + +
6 MACII 49K 49.7KHz 75Hz - -
7 800*600(85) 53.6KHz 85Hz + +
8 1024*768(75) 60.0KHz 75Hz + +
9 1280*1024(60) 64.0KHz 60Hz + +
10 1024*768(85) 68.6KHz 85Hz + +
11 1280*1024(75) 79.9KHz 75Hz + +
12 1280*1024(85) 91.1KHz 85Hz + +
13 1600*1200(75) 93.7KHz 75Hz + +
14 1024*768(60) 48.3KHz 60Hz - -
15 800*600(60) 37.8KHz 60Hz + +
16 MACII 35K 35.0KHz 67Hz - +
17 MAC 1152*870 68.7KHz 75Hz - -
18 VGA720*400(70) 31.5KHz 70Hz - +
3. Normal Condition Definition
(A) Input AC Voltage 110V/60Hz.
(B) Warm up time minimum 30 minutes.
(C) Full White Pattern.
(D) All VR’s adjust to Center Position.
(F) Color temp 9300K