Install stem seal (3) to the valve guide. Completely fit
the breast of the seal in the guide groove.
(b) Install valve (4), valve spring (5) and retainer(6)
in this order. Compress the spring with a valve lifter
to install valve cotter (7) securely. Install caps (8)
when installing rocker shaft assembly.
(c) Install thermostat, nozzle holders, glow plugs
and exhaust manifold in the cylinder head.
(14) Install the cylinder head assembly as follows:
(a) Place the gasket (1) to crankcase (2) and install
cylinder head (3). Use two guide bolts (4) to
prevent the gasket from moving when placing
cylinder head to the crankcase.
[CAUTION)
Do not apply any sealant to the gasket.
(b) Tighten the cylinder head bolts to a torque of
12 kg-m (86.8 lb-ft) at exhaust side and at intake
side in the sequence shown below.
CYLINDER HEAD ASSEMBL V
1-Cylinder head 2-Valva guide 3-Stem seal 4-Valve
I-Valve spring &-Retainer 7-Valve cotter 8-Valve cap
I-Combustion chamber jet
••
14 12
402507
