ENGINE <4D5-Step
III
> -
Timing Belt and Timing B
11-8
REMOVAL SERVICE POINTS
A
A
"
CRANKSHAFT PULLEY REMOVAL
1. Turn the crankshaft clockwise, align the timing marks
to set No.1 cylinder to TDC of its compression stroke.
Caution
Never turn the crankshaft anticlockwise.
2. Use the special tool to keep crankshaft from turning and
remove the bolts.
A
B
"
TIMING BELT REMOVAL
1. When reinstalling timing belt, mark an arrow at the belt
to show rotation direction.
2. Loosen the tensioner mounting bolt A and B.
3. Push timing belt tensioner to water pump side and tighten
the tensioner mounting bolt A and B. Secure so that
tensioner will not move back.
A
C
"
TIMING BELT B REMOVAL
1. When reinstalling timing belt B, mark an arrow at the
belt to show rotation direction.
2. Loosen the tensioner mounting bolt C and nut D.
3. Push timing belt tensioner to water pump side and tighten
the tensioner mounting bolt C and nut D. Secure so that
tensioner will not move back.
Timing marks
MD998721
Tilt to water pump side
A
B
Water pump
C
D
