Mitsubishi MOTORS OUTLANDER PHEV 2019, Quick Manual

Page: 7 / 10

7
How to use electric device during charging
If you turn the operation mode of the power switch to “ON” during
normal charging, quick charging, V2H charging, V2H power supply,
you can use the air conditioner, car navigation system, audio
equipment and so on.
How to use
1. Start the normal
charging or the quick
charging. Refer to
“Normal charging” on
page 6. Refer to “Quick
charging” on page 6.
2. After confirming the
normal charging or
the quick charging began correctly,
put the operation mode of the power
switch in ON.
3. The message on the right will appear
on the information screen in the multi
information display
*1 and electric
devices such as air conditioner *2 , car
navigation system, audio equipment
can be used.
*1： Other messages with higher priority may be displayed.
*2： For vehicles without electric heater, heating of air conditioner
cannot be used during charging.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3 ：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1 ：
*
2 ：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3 ：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1 ：
*
2 ：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
Automatic OFF of the operation mode*3
In the following cases, the operation mode will be turned to OFF
automatically.
• When the remaining amount of the drive battery further
decreases after air conditioner is stopped.
• When the outside air temperature is low and the following
warning display is shown.
• When charging is completed.
• When the normal charge connector is
disconnected.
• When the charging stop operation is
performed by the quick charger.
• When quick charging time has passed 60 minutes.
• When the stop condition (charging amount/charging time) on the
quick charger is satisfied.
• When charging stops due to the electrical power outage.
• When charging stops due to a failure.
• When operating the selector lever to “ ” (NEUTRAL) position.
(charging also stops)
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3
：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1
：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
*4： Even when you are not operating air conditioner, car navigation system, audio equipment, etc., since the on-board computer
consumes electricity, arrows may be displayed from the charger or the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation system, audio equipment, etc.
If you change the setting of the air conditioner, it may take time until the display of energy flow stabilizes.
Automatic stop of the air conditioner
• In the following cases, the air
conditioner automatically stops.
When the air conditioner stops,
the air conditioner control panel
turns off.
• When the remaining amount of
the drive battery becomes low
and the warning is displayed.
• When the temperature of the
drive battery becomes extremely
low and the warning is displayed.
Energy flow display
during charging
• When the charge connector is connected to
the charge port, the energy flow display during
charging can be displayed by operating the multi-
information display switch. You can see the state
of charging and discharginig of the drive battery.
*4
When charging the drive battery
• This is a display when
charging the drive battery.
Charging stops when the
drive battery is fully charged.
When discharging from
the drive battery
• This is a display when
discharging from the drive
battery. If you want to
charge, put the operation
mode of the power switch
in OFF or operate the air
condition etc.
When the V2H power
supply
• This is a display when the
electricity is being supply to
the V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3
：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1
：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3
：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1
：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4 ：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3 ：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1 ：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3 ：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1 ：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
23 24
Convenient Features 2
How to use
If you turn the operation mode of the power switch to “ON” during normal charging, quick charging,
V2H charging, V2H power supply, you can use the air conditioner, car navigation system, audio
equipment and so on.
1. Start the normal charging or the quick charging.
Refer to “Normal charging” on page 9.
Refer to “Quick charging” on page 10.
2. After confirming the normal
charging or the quick
charging began correctly, put
the operation mode of the
power switch in ON.
The message on the right
will appear on the informa-
tion screen in the multi
information display*
1
and
electric devices such as air
conditioner*
2
, car navigation system, audio
equipment can be used.
3.
Release button
Charging port courtesy lamp
Charging indicator
*
3
：
Even when the operation mode automatically
put off, air conditioners, car navigation
systems, audio equipment, etc. will stop.
Also, the vehicle status will be the same as
putting OFF the operation mode such as the
lights go off, the room lamp is illuminated or
retract the electric mirrors.
*
1
：
*
2
：
Other messages with higher priority may be
displayed.
For vehicles without electric heater, heating
of air conditioner cannot be used during
charging.
Automatic OFF of the operation mode*
3
In the following cases, the operation mode
will be turned to OFF automatically.
When the remaining amount of the drive
battery further decreases after air conditioner
is stopped.
When the outside air temperature is low and
the following warning display is appeared.
When charging is completed.
When the normal charge connector is discon-
nected.
When the charging stop operation is performed
by the quick charger.
When quick charging time has passed 60
minutes.
When the stop condition (charging amount/
charging time) on the quick charger is
satisfied.
When charging stops due to the electrical
power outage.
When charging stops due to a failure.
When operating the selector lever to “ ”
(NEUTRAL) position. (charging also stops)
•
•
•
•
•
•
•
•
•
•
*
4
：
Even when you are not operating air conditioner, car navigation system, audio equipment, etc.,
since the on-board computer consumes electricity, arrows may be displayed from the charger or
the drive battery.
Energy flow display may change regardless of the operation of air conditioner, car navigation
system, audio equipment, etc.
If you change the setting of the air conditioner,it may take time until the display of
energy flow stabilizes.
When the V2H power
supply
Energy flow display during charging
When the charge connector is connected to the charge port, the energy flow display during charging
can be displayed by operating the multi-information display switch. You can see the state of charging
and discharginig of the drive battery.*
4
When charging
the drive battery
When discharging
from the drive battery
In the following cases, the air conditioner automatically stops. When the air conditioner stops, the air
conditioner control panel turns off.
Automatic stop of the air conditioner
When the remaining amount of the drive battery becomes low and the following warning display is
appeared.
•
When the temperature of the drive battery becomes extremely low and the following warning
display is appeared.
•
• •
•
•
How to use electric device during charging
This is a display when charging
the drive battery. Charging
stops when the drive battery is
fully charged.
This is a display when discharg-
ing from the drive battery. If you
want to charge, put the
operation mode of the power
switch in OFF or operate the air
condition etc.
This is a display when the
electricity is being supply to the
V2H system.
*3： Even when the operation mode automatically turns off, air
conditioners, car navigation systems, audio equipment, etc.
will stop.
Also, the vehicle status will be the same as putting OFF the
operation mode such as the lights turn off, the room lamp is
illuminated or retract the electric mirrors.
Using Electric Devices During Charging