manualshive.com logo in svg

Mitsubishi MOTORS M.U.T.-III, Owner'S Manual, Page: 8 / 101

Share
Download
Mitsubishi MOTORS M.U.T.-III Owner'S Manual Download Page 8

 

1 

 

Chapter 1 Product Overview 

1-1. Precautions 

Service Work Precautions 

• 

Be sure to follow all basic service work precautions when using MUT-III during vehicle 
inspection and service work.   

• 

For detailed information regarding service work precautions, refer to the service instruction 
manual of each vehicle.

 

 

Work Precautions 

• 

When performing vehicle inspection work at the work site with the engine running, either use an 
exhaust gas discharger or ventilate the area sufficiently. 

• 

When working on a vehicle, be sure to apply the parking brake and set wheel chocks in place to 
prevent the car from moving.

 

 

Driving Precautions 

• 

If you wish to use MUT-III while driving the target vehicle, first verify that all parts are properly 
assembled. 

• 

While driving, always have an assistant operate MUT-III. 

• 

Be sure that the MUT-III main harness and other cables will not interfere with driving. 

• 

Install and remove the PC and V.C.I. with the vehicle parked, IG switch OFF.

 

 

PC Usage Limitations

 

Do Not Install Software on the PC 

• 

The MUT-III PC is a special service tool. Do not install any software other than MUT-III software 
onto the unit. Installation of other software results in the risk of MUT-III system failure. 

• 

Any unauthorized software will not be supported.  Technical support for units with 
unauthorized software will be charged additional technical support fees to return the unit to its 
authorized state of operation. 

• 

All unauthorized software will be erased with each new upgrade. 

 

Precautions

 

Summary of Contents for M.U.T.-III






































































































Reviews:

No comments