36
(4) Item
Select
Select an item you wish to record and apply the selection
using button.
When the selection has completed, press the button.
-- Inserts the item selected in “
Available items
list” into
the selected area of “
Selected items
list”.
-- Inserts the item selected in “
Selected items
list” into
the lowermost area of “
Available items
list”.
-- Inserts all the items from “
Selected items
list” into
the lowermost areas of “
Available item
s list”.
-- Changes the order in which the items are displayed
in “
Selected items
list” and “
Available items
list”, in
the sequence of default setting.
Note:
-A maximum of 16 items can be recorded.
-“Fuel pressure” and “Voltmeter” cannot be selected
simultaneously.
When you select the item “Fuel pressure”
1. Pressure gauge list is displayed after the item selection.
Select a type of pressure gauge used for fuel pressure
measurement, and press button.
2. Set up calibration voltage of the pressure gauge,
and press button.
Note:
For details on how to measure calibration voltage,
refer to 11-2-1(1).
(5) Trigger method / Recording style Select
-Select trigger method, and put mark. (Multiple selection)
-Put the mark on “PC Drive recorder”.
When completed the selection, press button.
“
Manual Trigger
” -- Allows you to set the trigger manually.
--to (8)
“
Diagnosis Code Trigger
” -- Applies the trigger when the
specified diagnostic code is generated. -- to (6)
“
Threshold Trigger
” -- Applies the trigger when condition
meets the set threshold. -- to(7)
Drive Recorder <Record on PC with displaying data>