Mitsubishi MOTORS Lancer Evolution VIII 2003, Technical Information Manual

Page: 87 / 368

GENERAL INFORMATION
EXTERIOR 51-2
GENERAL INFORMATION
M2510000100547
The front mask carries on and further instills the new
Mitsubishi design identity while also achieving a bal-
ance of cooling and aerodynamic performance. Con-
sideration was also given to production model
qualification, and the new model aims to demon-
strate the evolution over its predecessor with a
dauntless and aggressive new look as well as the
appearance of higher quality.
DESIGN FEATURES
.
1. Large Three Diamond Mark
The three-dimensional mark creates the presence
that befits the carís identity.
.
2. Front Bumper with Integrated Grille
The front bumper expresses the brandís design
identity while satisfying cooling requirements.
.
3. Front Air Dam
The design strikes a continuous line with the
bumper for an integrated look.
.
4. Rear Spoiler
Two types of rear spoiler are available (i.e. Type A
and B). Type A is made of carbon fiber. Type B is
equipped with high-mount stop light.
.
5. Rear Bumper
The design achieves a balance with that of the
front bumper while it remains simple and does not
appear to protrude or stand out.
.
6. Lancer and Evolution Mark
The layout of the marks is in keeping with the
brand strategy while it recreates in cool fashion the
technical image of the Evolution.
.
USER-FRIENDLINESS
7. Two-speed type windshield wipers.
8. The rear wiper has an initial continuous operation
and reverse gear-linked operation functions.
9. Electric remote-controlled outside mirror.
.
SUPPORT RECYCLING OF RESOURCES
Aggressively uses PP (polypropylene) materials that
are easy to recycle.
.
AC205386
AC210723
AC205387
AB
2
3
1
5
6
4
7
9
8